Product Overview:
The WAW-600D 60-ton tensile testing machine adopts a lower-cylinder mainframe structure and is primarily used for tensile, compressive, bending, and other mechanical property tests of metallic materials, non-metallic materials, product parts, components, structural parts, and standard components. Equipped with special measuring devices, it can complete elastic modulus tests and measurements of maximum force total elongation tests.
If equipped with an environmental device, this series of 60-ton tensile testing machines can also conduct material tensile, compression, and bending tests under specific environments. For example, high-temperature tensile, low-temperature tensile, compression, and other tests.
It is suitable for use in steel, metallurgy, construction and building materials, quality inspection centers, water conservancy and hydropower, highway bridges, research institutes, colleges and universities, as well as other factories, mines, enterprises, and testing and research institutions in the field of mechanics.
1. Manufacturing and inspection standards of products
1. GB2611 "General Technical Requirements for Testing Machines"
2. JJG139 "Tensile, Compressive, and Universal Testing Machines"
II. Applicable Test Method Standards
The experimental operation and data processing meet hundreds of standard requirements, including GB/T228 "Metallic Materials - Tensile Testing at Room Temperature", GB/T7314 "Metallic Materials - Compression Testing at Room Temperature", and GB/T232 "Metallic Materials - Bend Testing". Additionally, data processing methods that meet different standards can be configured according to customer needs.
III. Main performance and technical indicators
1. Maximum test force (kN): 600
2. Relative error of test force indication: ≤ ±1% of the indication
3. Test force measurement range: 2% to 100% of the maximum test force
4. Clamping method: hydraulic clamping
5. Diameter range for clamping round samples (mm): Φ6 to Φ40
6. Thickness range for flat specimen clamping (mm): 0-30
7. Flat specimen clamping width (mm): 80
8. Maximum tensile testing space (mm): 590
9. Maximum compression test space (mm): 500
10. Overall dimensions of the control cabinet (mm): 1200×620×850
11. Overall dimensions of the main unit (mm): 730×590×2200
12. Motor power (kW): 2.1
13. Host machine weight (kg): 1700
14. Clear spacing between columns (mm): 450
15. Size of upper and lower pressure plates (mm): Φ140
16. Bending support rod spacing (mm): 400
17, width of curved support rod (mm): 140
18, allowable bending degree mm: 100
19. Maximum piston stroke (mm): 200
20. Maximum piston movement speed (mm/min): approximately 60
21. Test space adjustment speed (mm/min): approximately 100
