100 ton casting tensile testing machineWAW-1000E

Product Overview:

The 100 ton casting tensile testing machine adopts a dual space structure with an oil cylinder placed below, where the upper crossbeam and the middle crossbeam are the tensile space, mainly used for tensile testing of the sample; The space between the workbench and the middle crossbeam is a compression space, which can be used for compression, bending, shearing and other tests of the sample. The tension space and compression space can be automatically adjusted by rotating the screw and driving the middle crossbeam to move up and down.

The 100 ton casting tensile testing machine is mainly used for tensile, compression, bending, shear and other tests of metal materials. Equipped with corresponding fixtures, it can be used for tensile, compression, bending, shear, bending and other tests of other types of specimens.

A closed-loop servo control system composed of a controller, servo valve, load sensor, displacement sensor, extensometer, and computer can automatically and accurately control the testing process, and automatically measure testing parameters such as force, displacement, and deformation.

The testing machine can achieve tests such as equal rate test force, constant rate deformation, and constant rate displacement, and can achieve three-stage control of force, deformation, and displacement in one test, with smooth transitions between each control.

The experimental parameters can be automatically controlled and the experimental results can be obtained through computer collection and software processing. Real time display of test curves and results on computer screens, and printing of test reports and curves.

Technical Specifications:

Specification and model: WAW-1000E 100 ton casting tensile testing machine

Maximum load (kN): 1000

Accuracy level of testing machine: Level 1

Relative error of test force indication: within ± 1%

Test force measurement range: 1% -100% FS

Deformation measurement range: 1% -100% FS

Relative error of deformation indication: within ± 1%

Range of stress loading rate: 1-100mpa/S

Main cylinder piston stroke (mm): 250

Main cylinder piston rising speed (mm/min): 0-90

Middle crossbeam lifting speed (mm/min): 300

Number of columns: 6

Effective distance between columns (mm): 590

Maximum stretching space (mm): 750

Maximum compression space (mm): 700

Clamping range of circular specimen clamp (mm): Φ 15~Φ 55

Plate sample clamping thickness (mm): 2-40

Pressure plate size (mm): 200 * 200 * 20

Host dimensions (length x width x height, mm): 1120 * 730 * 2450

Oil source dimensions (length x width x height, mm): 1080 * 620 * 850

Total power (kW): 5

Weight (kg): 3200