Digital hydraulic universal testing machine WES-D series
Digital hydraulic universal testing machine WES-C series
Digital hydraulic universal testing machine WES-B series
Microcomputer screen display hydraulic universal testing machine WEW-E series
Microcomputer screen display hydraulic universal testing machine WEW-D series
Microcomputer screen display hydraulic universal testing machine WEW-C series
YAW-3000D Computer control compression testing machine
YAW-2000D Computer control compression testing machine
YAW-300C Computer control cement compression and flexture testing machine
YAW-300Y Constant Stress Flue Pipe Compression Testing Machine
2000 KN Manual Control Hydraulic Concrete Compression Testing Machine CTM


The FZG gear wear testing machine is used to evaluate the ability of gears or lubricants to resist adhesive load and adhesive fatigue. This design principle and working principle can be followed for development and testing. Customized test benches are higher than standard requirements and can better meet special testing needs.
Applicable standard
DIN 51354-2-1990 Lubricant Inspection FZG Gear Testing Machine
DIN/ISO14635-2011 FZG testing gear oil pressure plastic deformation bearing capacity
ASTM D5182-97 (2014) Test Method for Evaluating Oil Wear Load Capacity
GB/T19936.1-2005 Oil relative adhesive bearing capacity FZG test method
GB/T 13672-1992 Test Method for Bonding Load Capacity of Gears
SH/T 0200-1992 Determination of Shear Stability of Polymer Lubricating Oil (Gear Machine Method)
NB/SH/T0306-2013 Lubricating Oil Load Capacity Evaluation (CL-100 Gear Machine Method)
GB/T14229-1993 Gear Contact Fatigue Strength Test Method

1. Maximum torque: 1000Nm
2. Maximum load level: Level 13
3. Temperature control range: 0-100 ℃
4. Drive motor power: 6.5/8kW (customizable)
5. Drive motor speed: 1450/2880r/min (customizable)
6. Test gearbox capacity (from shaft centerline to box bottom): 1.25L
7. Heating power: 0.5 × 3=1.5kW
8. Data collection frequency: greater than 10Hz
9. Standard test gear: module 4.5, large gear teeth 24, small gear teeth 16, center distance 91.5mm
10. Gear accuracy grade: Grade 5





