The WES-C digital hydraulic universal testing machine is mainly used for testing the mechanical properties of metal materials such as tension, compression, bending, and shear. With simple accessories and devices, it can also test cement, concrete, rubber, and their products.
This digital hydraulic universal material testing machine is widely used for material inspection and analysis in industries such as aerospace, machinery manufacturing, and building materials. It is an ideal testing equipment for research institutes, colleges and universities, industrial and mining enterprises, technical supervision, commercial inspection and arbitration departments.
Manufacturing of testing machine:
1. The main engine adopts a bottom mounted structure with oil cylinders, and the stretching space is located above the main engine. The compression and bending test space is located between the lower crossbeam and the worktable below the main engine. The test space is adjusted by the movement of the lower crossbeam, and the lifting of the lower crossbeam is driven by a motor through a reducer, a chain transmission mechanism, and a screw pair.
2. This hydraulic universal testing machine adopts a convenient manual valve for open-loop test control, drives a precision gap sealing hydraulic cylinder, and completes performance tests such as tensile, compression, and bending resistance of the sample. The operation is direct, fast, and efficient, meeting the requirements of national standards
3. The force measuring mechanism uses sensors to measure the test force, and completes the setting, data acquisition, processing, analysis, and storage of test parameters during the test process through a digital display. The interface displays the size of the test force, loading speed, and maximum test force. It can also automatically calculate the tensile strength, yield strength of materials with obvious yield characteristics, and calculate test data such as elongation at break.
4. It has limit protection, overcurrent protection, load overload protection, etc.
| 规格型号 | WES-600C | WES-1000C |
| 最大负荷（kN） | 600 | 1000 |
| 试验机准确度等级 | 1级 | 1级 |
| 试验力示值相对误差 | ±1％以内 | ±1％以内 |
| 试验力测量范围 | 1％～100％FS | 1％～100％FS |
| 变形测量范围 | 1%～100%FS | 1%～100%FS |
| 变形示值相对误差 | ±1％以内 | ±1％以内 |
| 应力加载速率范围 | 1～100MPa/s | 1～100MPa/s |
| 主油缸活塞行程（mm） | 200 | 200 |
| 主油缸活塞上升速度（mm/min） | 0～60 | 0～60 |
| 中横梁升降速度（mm/min） | 300 | 300 |
| 立柱数 | 4 | 4 |
| 立柱间有效距离（mm） | 530 | 640 |
| 最大拉伸空间（mm） | 800 | 800 |
| 最大压缩空间（mm） | 700 | 700 |
| 圆试样夹块的夹持范围（mm） | Φ6～Φ40 | Φ6～Φ60 |
| 板试样夹持厚度（mm） | 0～30 | 0～40 |
| 压板尺寸（mm） | Φ140 | 200×200×20 |
| 主机外形尺寸（长×宽×高mm） | 900×580×2200 | 1150×750×2500 |
| 油源外形尺寸（长×宽×高mm） | 1128×700×930 | 1128×700×930 |
| 总功率（kW） | 2.1 | 2.5 |
| 重量（kg） | 1800 | 3500 |
