CD-2510Electronic Extensometer、Testing machine extensometer

Testing machine accessory
1. Purpose:This extensometer is an electronic sensor used to detect material deformation. It can convert the deformation of the test into an electrical signal and input it into the measurement and control system of the material testing machine. The measurement and control system amplifies, samples, and digitizes the input electrical signal for storage, calculation, and display.2. Technical pa...
contact us

1. Purpose:

This extensometer is an electronic sensor used to detect material deformation. It can convert the deformation of the test into an electrical signal and input it into the measurement and control system of the material testing machine. The measurement and control system amplifies, samples, and digitizes the input electrical signal for storage, calculation, and display.

2. Technical parameters

a) Gauge length: 25mm

b) Maximum measured deformation: 10mm

c) Excitation voltage: 5V-10V

d) Sensitivity: 2mv/v

e) Input impedance: 780 Ω

f) Output impedance: 350 Ω

g) Temperature range for use: -10 ℃ to+55 ℃

Jinan chenda testing machine manufacturing co.,ltd
Anny
  • International trade manager
  • Email(1): jncdtester@yahoo.com 
  • Tel:+86 0531 61311368
  • Email(2):  jncdtester@163.com 
  • Mobile:+86 18615172109
  • Whatsapp:+86 18615172109 
Copyright ©Jinan Chenda Testing Machine Manufactur
鲁ICP备16012227号-5
technical support：Jinan Leiming Network
0.138889s